walimex pro Aptaris Blackmagic Cinema

• Innovatieve en flexibel Cage-System geschikt voor vele toepassingen.
• Veel 1/4 inch en een 3/8 inch schroefdraad voor het monteren van accessoires zoals LED-licht, microfoon, Follow Focus, etc.
• Precies afstemmen van camera model Black Magic Cinema.
• Made in Germany
• Gemaakt van extreem licht en stabiel vliegtuig aluminium.
• Verstelbare handgreep, kan van alle kanten worden gemonteerd

Inhoud

• 1x Aptaris Cage for Blackmagic Cinema 2.5 and 4 K, 1x handle, 1x hot shoe adapter, 1x 250 mm rods,1x 200 mm rods, fastening screws, open end spanner

Omschrijving

Aptaris – prepares cameras for accessories
The Aptaris Cage-System ”Made in Germany” makes your camera suitable for accessories and thus enables professional results in filming and photography.

Exactly fitting for Blackmagic Cinema
Specially developed for the popular film camera Blackmagic Cinema 2.5 and 4 K, the system adapts to 100 % to your camera. “Aptaris” is thereby simply fastened to the camera by means of a 1/4 inch thread.

Rods above and below the cage for highest flexibility
Thanks to the large number of 1/4 inch threads around the cage, a vast amount of accessories, like e.g. microphones or LED-lamps, can be mounted, as desired. The rod modules above and below the cage are a particular highlight. Each of the 250 mm long rods of 15 mm light weight support industrial standard can be used for the direct attachment of accessories like Follow Focus and matter box and are thus flexible in use. The stainless steel rods can obviously also be removed at any time. The bottom rod module comes with a 3/8 inch tripod thread for use with a tripod. The adjustable handle, which can be mounted at the top, the bottom or at the sides, just as required, provides additional flexibility in use. This enables also filming near ground level. Access to battery compartment, memory card etc. is in any case ensured.

Many possible extensions and combinations
Aptaris is one system. You can therefore extend the cage to a perfect rig by simply mounting the Aptaris handle and shoulder support module. Additional, convenient accessories , like a cable protection, a lens support or a monitor holder, round off the Aptaris system.

Premium quality “Made in Germany”
Developed and manufactured in Germany, Aptaris convinces with highest precision in workmanship, outstanding material properties and well thought-out engineering. Stringent quality inspections ensure premium quality and extreme longevity even under highest loads in permanent use. This is supported by exceptional material properties: Aptaris is made of extremely light aircraft aluminium and stainless steel. Aptaris Blackmagic Cinema therefore is very comfortable in use, but still very sturdy. Thanks to the black anodizing Aptaris additionally scores with its noble design.

Dimensions incl. handle (H x W) approx. 262 mm x 189 mm
Weight incl. rods approx. 1100 g
Material Cage Aircraft aluminium, black anodized
Material rods Stainless steel

walimex pro Aptaris Blackmagic Cinema

<ul> <li>Innovatieve en flexibel Cage-System geschikt voor vele toepassingen.</li> <li>Veel 1/4 inch en een 3/8 inch schroefdraad voor het monteren van accessoires zoals LED-licht, microfoon, Follow Focus, etc.</li> <li>Precies afstemmen van camera model Black Magic Cinema.</li> <li>Made in Germany</li> <li>Gemaakt van extreem licht en stabiel vliegtuig aluminium.</li> <li>Verstelbare handgreep, kan van alle kanten worden gemonteerd</li> </ul> <br /> <p> <b>Inhoud</b> </p> <ul> <li>1x Aptaris Cage for Blackmagic Cinema 2.5 and 4 K, 1x handle, 1x hot shoe adapter, 1x 250 mm rods,1x 200 mm rods, fastening screws, open end spanner</li> </ul> <br /> <p> <b>Omschrijving</b> </p> <b>Aptaris – prepares cameras for accessories</b><br />The Aptaris Cage-System ”Made in Germany” makes your camera suitable for accessories and thus enables professional results in filming and photography.<br /><br /><b>Exactly fitting for Blackmagic Cinema</b><br />Specially developed for the popular film camera Blackmagic Cinema 2.5 and 4 K, the system adapts to 100 % to your camera. “Aptaris” is thereby simply fastened to the camera by means of a 1/4 inch thread.<br /> <p> <b>Rods above and below the cage for highest flexibility</b><br /> Thanks to the large number of 1/4 inch threads around the cage, a vast amount of accessories, like e.g. microphones or LED-lamps, can be mounted, as desired. The rod modules above and below the cage are a particular highlight. Each of the 250 mm long rods of 15 mm light weight support industrial standard can be used for the direct attachment of accessories like Follow Focus and matter box and are thus flexible in use. The stainless steel rods can obviously also be removed at any time. The bottom rod module comes with a 3/8 inch tripod thread for use with a tripod. The adjustable handle, which can be mounted at the top, the bottom or at the sides, just as required, provides additional flexibility in use. This enables also filming near ground level. Access to battery compartment, memory card etc. is in any case ensured. <br /> <br /> <b>Many possible extensions and combinations</b><br /> Aptaris is one system. You can therefore extend the cage to a perfect rig by simply mounting the Aptaris handle and shoulder support module. Additional, convenient accessories , like a cable protection, a lens support or a monitor holder, round off the Aptaris system.<br /> <br /> <b>Premium quality “Made in Germany”</b><br /> Developed and manufactured in Germany, Aptaris convinces with highest precision in workmanship, outstanding material properties and well thought-out engineering. Stringent quality inspections ensure premium quality and extreme longevity even under highest loads in permanent use. This is supported by exceptional material properties: Aptaris is made of extremely light aircraft aluminium and stainless steel. Aptaris Blackmagic Cinema therefore is very comfortable in use, but still very sturdy. Thanks to the black anodizing Aptaris additionally scores with its noble design. </p> <b>Dimensions incl. handle (H x W)</b> approx. 262 mm x 189 mm <br /> <b>Weight incl. rods</b> approx. 1100 g <br /> <b>Material Cage</b> Aircraft aluminium, black anodized <br /> <b>Material rods</b> Stainless steel <br />

Beschrijving gevonden op Bol.com