Dayton Audio DS270-8 10 Designer Series Woofer Speaker
Available at:
The Dayton Audio Designer Series DS270-8 10 can operate at its full rated power down to 27 Hz without exceeding Xmax! Highlights * Cosmetic frame with low profile lip, designed for front mounting—no countersinking required! * Coated paper cone, half roll rubber surround for durability and accurate reproduction * Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet * Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers * Vented pole piece for minimized power compression and maximized reliability * Generous Xmax capability encourages use of moderate bass boost to tailor the response * Retains the same family look as the popular Dayton Audio DVC Series subwoofers and passive radiators Product Details Dayton Audio DS270-8 10 Designer Series Woofer Speaker The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax. These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence. PRODUCT SPECIFICATIONS Nominal Diameter 10 Power Handling (RMS) 100 Watts Power Handling (max) 200 Watts Impedance 8 ohms Frequency Response 30 to 3,000 Hz Sensitivity 90.7 dB 2.83V/1m Voice Coil Diameter 1.52 Magnet Weight 62 oz. THIELE-SMALL PARAMETERS Resonant Frequency (Fs) 31.6 Hz DC Resistance (Re) 5.4 ohms Voice Coil Inductance (Le) 1.25 mH Mechanical Q (Qms) 2.40 Electromagnetic Q (Qes) 0.54 Total Q (Qts) 0.44 Compliance Equivalent Volume (Vas) 3.09 ft.³ Mechanical Compliance of Suspension (Cms) 0.48 mm/N BL Product (BL) 10.1 Tm Diaphragm Mass Inc. Airload (Mms) 56.4g Maximum Linear Excursion (Xmax) 5.5 mm Surface Area of Cone (Sd) 353 cm² MATERIALS OF CONSTRUCTION Cone Material Coated Paper Surround Material Rubber Voice Coil Wire Material Copper Voice Coil Former Aluminum Basket / Frame Material Steel Magnet Material Ferrite MOUNTING INFORMATION Overall Outside Diameter 10.63 Baffle Cutout Diameter 8.94 Depth 4.41 Bolt Circle Diameter 10.24 # Mounting Holes 5 OPTIMUM CABINET SIZE (DETERMINED USING BASSBOX 6 PRO HIGH FIDELITY SUGGESTION) Sealed Volume 1.28 ft.³ Sealed F3 55 Hz Vented Volume 3.38 ft.³ Vented F3 28 Hz
Dayton Audio DS270-8 10 Designer Series Woofer Speaker
The Dayton Audio Designer Series DS270-8 10 can operate at its full rated power down to 27 Hz without exceeding Xmax! Highlights * Cosmetic frame with low profile lip, designed for front mounting—no countersinking required! * Coated paper cone, half roll rubber surround for durability and accurate reproduction * Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet * Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers * Vented pole piece for minimized power compression and maximized reliability * Generous Xmax capability encourages use of moderate bass boost to tailor the response * Retains the same family look as the popular Dayton Audio DVC Series subwoofers and passive radiators Product Details Dayton Audio DS270-8 10 Designer Series Woofer Speaker The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax. These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence. PRODUCT SPECIFICATIONS Nominal Diameter 10 Power Handling (RMS) 100 Watts Power Handling (max) 200 Watts Impedance 8 ohms Frequency Response 30 to 3,000 Hz Sensitivity 90.7 dB 2.83V/1m Voice Coil Diameter 1.52 Magnet Weight 62 oz. THIELE-SMALL PARAMETERS Resonant Frequency (Fs) 31.6 Hz DC Resistance (Re) 5.4 ohms Voice Coil Inductance (Le) 1.25 mH Mechanical Q (Qms) 2.40 Electromagnetic Q (Qes) 0.54 Total Q (Qts) 0.44 Compliance Equivalent Volume (Vas) 3.09 ft.³ Mechanical Compliance of Suspension (Cms) 0.48 mm/N BL Product (BL) 10.1 Tm Diaphragm Mass Inc. Airload (Mms) 56.4g Maximum Linear Excursion (Xmax) 5.5 mm Surface Area of Cone (Sd) 353 cm² MATERIALS OF CONSTRUCTION Cone Material Coated Paper Surround Material Rubber Voice Coil Wire Material Copper Voice Coil Former Aluminum Basket / Frame Material Steel Magnet Material Ferrite MOUNTING INFORMATION Overall Outside Diameter 10.63 Baffle Cutout Diameter 8.94 Depth 4.41 Bolt Circle Diameter 10.24 # Mounting Holes 5 OPTIMUM CABINET SIZE (DETERMINED USING BASSBOX 6 PRO HIGH FIDELITY SUGGESTION) Sealed Volume 1.28 ft.³ Sealed F3 55 Hz Vented Volume 3.38 ft.³ Vented F3 28 Hz
